还剩1页未读,继续阅读
文本内容:
垂直运输设备由于本群体工程平面大,根据计算,全现场共须需设置六台塔吊,12台龙门架其先开工的主教学楼设三台塔吊方能基本覆盖全部作业面因此在主教学楼施工的同时立1#、2\3#塔,在学生宿舍楼和教工及访问学者楼设一台4#塔,以保证主教学楼和学生宿舍楼和教工及访问学者楼施工的使用;在其余食堂及活动中心、锅炉房和调压站、后勤办公楼设和雕塑馆,共设二台5#、6#塔,在此部分开工后,将使用主教学楼拆除的两部塔吊现场除主教学楼1#塔为行走塔外,其余均为固定塔固定式塔吊塔基座落在与基础垫层同一标高处,基座四周砌360mm厚的围护墙,高出室外地坪500mm主教学楼的行走式塔基同室外地坪齐由于现场地质条件不好,其塔基将根据具体地质情况,设塔基桩或强地夯实等措施进行处理
6.
9.1塔吊安装及拆除1)塔吊安装说明根据本工程的特点及现场总平面情况,考虑现场布置四台塔吊,均为FO/23B塔吊,FO/23B塔吊臂长50m2)塔吊平面布置图见总平面布置图3)塔吊的位置选择与确定便于结构施工,进入现场后,在底板及基础施工前先将塔吊立起来(位置详见总平面布置)塔吊的安装位置充分考虑了现场施工场地和结构覆盖的影响,我部认为是比较合理的、可行的3)塔吊的安装与拆除a塔吊的安装流程塔吊基础一预埋底座支架一安装过渡节及套架总成一安装回转支撑及驾驶室一安装塔尖一吊装平衡臂一吊装大臂一装配重一组装钢丝绳一顶升到位一调试、自验收一安全站验收一使用b塔吊拆除流程降塔一大臂拆除一拆卸配重一平衡臂拆除一塔尖拆除一回转支撑及驾驶室拆除f过渡节、套架拆除
6.
9.2龙门架安装、使用及防护根据工期安排和考虑现场的平面布置,在二层围护墙砌筑施工时,为砌筑材料运输及装修提前插入创造条件,整个现场考虑设置12台龙门架,既主教学楼部分6台,学生宿舍楼部分1台,教工及访问学者楼2台,食堂及活动中心1台,后勤办公楼1台,雕塑馆1台其布置见总平面布置图龙门架安装流程:1)龙门架使用及防护根据龙门架的的安全使用要求,当龙门架投入使用前,必须进行坠落试验,对限速器要按规定进行检定、校核;在使用过程中及时对电梯进行润滑,定期进行维修、保养2)操作人员需要经过培训,考试合格方可上岗。