还剩10页未读,继续阅读
本资源只提供10页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
文本内容:
多版打印程序
6.2安装使用手册磨刀不误砍柴工,希翼使用此软件的朋友,能看一看此文文章不长,增加了使用技巧和疑难解答,希翼大家能够灵便使用多版打印程序,轻松应对日常的打印工作程序如何安装看完便知更新说明版面暹行了调整,选择打印机的方式改成为了和word一样,比以前简单多了在“多版打印”程序计算出的页码中,每页中的几个页码为一组,组间增加了一个空隔(可选),这样在选择部份页码(补页)时不至于选错增加的空隔不影响打印能够自动识别有重复页码的复杂文档,自动打开高级方式中的多节打印功能,并自动添加节数和每节的页数,使打印有隼复页码的文档变得很简单智能化成度更高些,对一些错误的操作拒绝计算并给出提示,自动排版等不少功能都有所增强纠正了程序中的几处错误如自动排版不能在Word2000中运行等原来不好用的功能现在来试一试,也许已经好用了把纸型微调变成为了版面右移(版面下移),固然为负数时就可以左移或者上移了可以解决反正面对不齐等问题绘制双装订线,也就是最后一页的右侧也画一条解决装订线不居中的问题“排版辅助”中增加“激光喷墨混合打印”功能,也就是说可以自动使文档中所有的图片消失,然后用激光打印机只打文字,然后使所有的黑色的文字消失然后用彩色喷墨打印只打图片文本框此外,也可以使用修改“起始页码”和“最大页码”来单独打印某一部份的页面,比如说,从“第5页”到“第8页”这4页没有打印好,需要隼新打印这4页,那末把“起始页码”改为“5”,“最大页码”改为“8”,计算并打印即可在单独打印某一部份页面的情况下,“起始页码”也可以为偶数,相应的“最大页码”则为奇数总之,要保证单独打印的页面数为4的倍数(“骑马订”方式的情况),或者单独打印的页面数为2的倍数(“边上装订”方式的情况)围骑马订简易打印我们日常的工作中,大部份都是简单的骑马订打印,复杂的必竟少,所以做了这个简化程序,添好所有的项目,按“打印正面”和“打印背面”按钮就分别不打印某一页完成正反面的打印,其中的各项可参见多版打印现在小册子的封面都是彩色的,普通都用彩色喷墨打印机单独来打印,所以在用激光打印机打印时常不需要打印封面,此功能就是解决此问题的,按一下“不打印某一页”前的方格,程序浮现“不打印的页中包含的一个页码”文本框,在里面添上不打印页里的任意一个页码即可补页或者单打按一下“补页或者单打”前的方格,程序浮现“要打印的页中包含的一个页码”文本框,在里面添上要打印页里的任意一个页码即可如要单独打印16页小册子中的“16,1,16,1〃这一页可以输入1或者16按“补页”按钮,或者输入2或者15按“补背面”按钮这四种方法都将打印“16,1,16,1〃这一页多版计算和骑马订简易计算T这两个程序和多版打印、骑马订简易打印很象,只是按打印按钮时不直接打印,而是浮现WORD的打印对话框,要打印的页码自动添加到页码范围的框中,在WORD的打印对话框中选择打印份数,打印机等参数后即可打印在WORD的打印对话框里还可以对要打印的页码迤行修改等排版辅助绘制装订线普通两版的小册子选“两端订钉”,四版的小册子选“中间一个钉”按相应的按钮就可以在首页和尾页自动插入装订线,如果程序自动画的装订线长度不理想,可以手工输入线的长度打印时将出双装订线,如果打印机打印的特殊正,两装订线中间将是纸张中间页数凑整页数凑整功能自动取销文档网格,并且只对行距暹行修改,不会影响字的大小等并把整个文档的行距全部统一变成一个特定的值,使总页数达到所期望的值如果文中有图片而且版式不是“嵌入型”的,那末图片的位置可以会混乱如果不理想,可以使用WORD的撤销功能(按撤销按钮二),或者不存盘直接退出周刊重排重新排版周刊,可省些地方,用来加入本地区的内容,本方案比较保守,没有对字的大小和行距做改动,所以视觉上和原来的没有什么区别可以先按周刊重排按钮,然后加入本地区内容,然后再按页数凑整按钮,就可完成周刊的重排工作自动排版功能的使用在“预设参数”中选择参数,不同的参数对应不同的字号大小和边距等(页面设置中的纸张是A4纸,所以如果是排一页四版的小册子,那末字号是24打印出来应是24/2=12,应比12小四号字略小)如果不合适可以根据需要自行修改然后按“自动排版”按钮,程序会自动完成排版(计算机慢,等的时间会长一些)然后退出“排版辅助”找到文章的标题并选中,按工具条中的“样”选中“标题一”标题就排好了再选中需要居中的文字,按工具条中的样选中“正文文本居中”就可以了(注意使用此功能前要先设置好“标题一”“正文文本居中”等样式)点击工具条中的“样”其中的“问”这个功能,可以把包含某一种字(比如“问”的段落变成另一种样式(比如“问”样式,使用此功能前要先设置好“问”这种样式)因包含的字和样式都可以手动输入,所以排版别的什么文章时也可以用到排小册子时,其中的标题没有共性,只能手动一个一个选,我这里向大家推荐使用格式刷缪(在“常用”的工具条中可以找到)先如上选中标题,按工具条中的样,选中“标题一”,标题就排好了,然后双击工具条中的格式刷缪(注双击和单击是有区别的,单击只能刷一次,而双击多次有效)再一个一个选中是标题的文字4最后根据实际情况用页数凑整功能使总页数被2或者整除如果自动排版完成后在页眉上浮现一横杠,只要双击此杠然后再按工具条上的关闭按钮或者双击页面即可如果这样不能消除此横杠,可以双击此杠,在菜单中选“编辑”一“全选”,再在菜单中选“格式”一“边框和底纹按一下对话框左上角在“无”字前的方格,然后按确定如果“封面”复选框前打钩,那末自动排版时文件的最前面会增加两个空页,可以用来制作封面,在文件的最后也会增加一个空白页,作为封底,它们之间用分节符来分隔多版打印程序可以识别这种格式虽然自动排版的自动化成度挺高的,但是也只是个辅助,因为实际情况是千变万化的,还是得学点Word排版才行制作卡片先建立一个空的Word文件,插入一个图片(菜单中选“插入”-“图片”-“来自文件”,找到需要的图片,插入文档中,也可以通过“复制、粘贴”的办法,把图片插入文件中)注意图片的版式必须是“嵌入型”(选中图片按右键,选“设置图片格式”-“版式”,按左上角的“嵌入型”上的图,然后按确定)如果觉得图片大小等不太合适,可以对图片做一些调整准备工作做好后,按等,在排版辅助程序中按一下“自动制作卡片”按钮,程序会根据图片的大小自动生成表格,并把图片放入其中,排满整页并自动生成一个一样的空表格放还第二页,用来放图片背面的内容,只要不改变表格的大黑色字与灰色字互换小等,就可以保证反正面能对上如打印的字太深,可用此功能注意有些打印机有调打印深浅的能力,如佳能和惠普的打印机不需要用此功能hpll50hplOlO系列等打印机都有调深浅的功能但不在打印机属性中选而是在打印工具箱中找样娶排版工具先选中要编辑的文本,按主•钮,行距在原来的基础上分别少量的增加或者减少,如果没有反映,说明所选的文本中包含不同的行距,+二▼可先按一下*二,然后再调Y先选中要编辑的文本,庭如冠字号将在原来的基础上分别增加或者缩小一磅不同大小的字可以一起选一起变大缩小悭XP中按己钮迤入修改样式对话框样钮里包含几种常见的样式程序安装按下面的安装按钮即可完成安装,如果按此按钮没有反应,请在菜单上点“工具”一“宏”一“安全性”,在对话框中有高、中、低三个选项,选“低”,按确定然后关闭此文件退出WORD再从新打开此文件,从新开始安装•安装成功后,请再按“安全性”按钮,在对话框中选“高”•安装成功后,程序会为您打开WORD启动文件夹如果在启动文中的文字也一样跑不掉“排版辅助”中增加了“制作卡片”的功能,可以根据图片的大小自动生成表格,并把图片放入其中,排满整页并自动生成一个一样的空表格,用来放图片背面的内容,来保证反正面能对上前言1更新说明1使用技巧和疑难解答2多版打印程序的使用5职多版打印围骑马订简易打印圜排版辅助心57祥璧多版计算和骑马订简易计算9排版工具程序安装101Q使用技巧和疑难解答12显示安装成功,但看不到多版打印程序在哪里先安装显示安装成功后在菜单中选“工具”一“模板和加载项”,在下面的大框中应该有多版打印程序,在它前面有一个方格,按一下,使里面浮现对号,然后按确定按钮多版打印程序工具条和菜单的修改众口难调,为了适应不同人的使用,多版打印的项目挺多,具体到某个人可能有些项目是多余的我们可以对工具条和菜单迤行删减和挪移在菜单中点“工具”一“自定义”,浮现“自定义对话框”后,可以不理它,直接在工具条中选中不想要的按钮,按右键,选“删除”可以从新摆放按钮,拖动按钮到适当的地方菜单也一样可以删除和修改选择和编辑计算出来的页码鼠标在页码的最左端会变成一个向右的小箭头,一点,就可以选中整行,按住向下一拉,就可选多行计算出的页码可以删除、修改和部份选取,在补页时很实用如有一个小册子24,1和18,7这两页已经有了,要补上其它的页,可以在计算出的页码中把这两页删掉,然后选中页码打印如果要继续全部打印,别忘了从新按一下“计算”按钮把删掉的页码补上,以免出错自动显示上次选择的页码在显示页码的大框中按右键,上次选择的页码将被涂蓝较长文件的打印因为Word中要打印的页码一次不能超过255个字符,所以打印较长的文件只能是分组打印,如果觉得不方便,打印时先选Adobe Acrobat
5.软件的虚拟打印机Acrobat PDFWriter来打印(选“双面打印”选项)结果是每一组将形成为了一个PDF文件,然后用Adobe Acrobat
5.0软件中的“插入页面”功能(顶行菜单一文档一插入页面)把几段链起来形成一个完整的PDF格式的文件,后再打印如果是外侧装订方式,也可以不选“双面打印方式”,因为外侧装订反正面看是一样,计算出正反面的页码一样或者只是顺序不同,只打印正面做一个PDF文件就可以了分节符的使用因为从
6.0版开始,程序可以识别多节有重复页码的文件,并自动把每节的页数添加到多版打印程序中,这样我们排版时就可以斗胆的使用分节的方式而不用为打印发愁了正规的书都是有重复页码的普通是封面、目录、正文起始页都是第一页,我们可以在封面和目录之间、目录和正文之间分别插入个分节符(方法是菜单一插入一分隔符,在框中分节符类型下面对选下一页),这样可以做出较正规的书了使用匡助程序的许多地方都有提示鼠标停留在按钮或者文本框中就会显示出提示信息本文本身就是一个说明书,还可以打印出来(两版的小册子),程序安装完成后请保留,以便查阅多个文档同时运行多版打印程序的方法打开一个文档,运行多版打印程序后,再打开另一个文档,那末在这两个文档中可分别运行多版打印程序,再多也一样制作卡片两面对不上的问题程序自动排出的版,反正面理论上是一定能对上的,如果实际打印中对不上,那就是打印机或者纸张的问题了,这个问题可以通过调整背面的页边距来实现,程序制作的卡片自动插入了分节符,也就是说正反面不在同一节,光标点一下第二面,在菜单中找“文件”-“页面设置”,在页面设置的框中有一项“应用于”应该显示是“本节”,这时再去调摆布边距时,只是第二面动,正面不会动,就可以使反正面对上了想把图片粘贴到表格中必须把图片的版式改成嵌入型建议使用Word XP在Word2000“修改样式”将变成“字体加粗”,(三“修〜改行距”将变成繁“简体变繁体”,这两个按钮将没有太大的意义了Word2003有人说不好,我也没发现有什么特殊增强的功能,Word XP功能强大,建议安装使用撤销按钮G■排版辅助的多个功能都对文档迤行了修改,所以使用这些功能前先保存一下文件,比较安全,一但发现自动修改的不很理想,懊悔了,可以直接退出而不存盘或者使用撤销按钮9■(在上面的工具栏中找),取销自动暹行的操作按前面的弯箭头程序会一步一步的撤销,按住右面向下的小三角,会下拉出一个菜单,向下选可以一下撤销很多步直至撤销所有操作向文件中加入文本的方法从别的文件中复制一些内容到自己的文档中往往会把文件的格式也复制过来,不少情况下,我们只需要文字,先前文件的格式影响我们从新排版,Word里有“选择性粘贴”的功能可以用也就是在文件中不直接粘贴,而是在菜单中选“编辑”-“选择性粘贴”,在框中选“无格式文本”,就可以了这时复制过来的文字的字号行距等格式将会和插入点所在行的格式相同最好是使用此方式往空文档中粘贴文字,然后再“自动排版”页数凑整后,最后一页空白太多在上面的工具条中按两下撤销按钮之文档将变成比期望值多一页然后再手动编辑,把页数凑整调整打印机属性的问题由于个人的技术问题,在windows ME中,多版打印程序可以调用打印机的属性对话框,而在windows XP系统中却无法实现这样在使用彩喷打印机时不是很方便希翼有此技能的同修能赋予匡助暂时解决此问题有如下方法,⑴使用多版计算和骑马订简易计算⑵多版打印程序的第3项皿为“打印设置〃,想改打印机属性,可以先选此项,选择打印机和修改打印机属性,然后再运行多版打印程序来打EPo激光喷墨混合打印的速度问题喷墨打印机的打印速度与打印内容的多少是有关系的,说具体点是和打印头挪移的距离有关打印一个空的文本框和一个大小一样有字的文本框所需要的时间几乎是一样的,所以有彩色文本框的文件想激光喷墨混合打印,你就要看看此框的大小,考虑混合打印是否合适或者不让喷墨打印机去打印多版打印程序的使用口多版打印选择“打印机”“打印方式”“每页版数”“打印份数”等,然后按“计算”按钮,大的文本框中将显示出计算出的页码,选中要打印的页码后按“打印”按钮,即可完成打印每页版数就是说一张纸上打印几页如打印周刊时选2,打印小册子时一般选4o打印方式如果打印较厚的书选外侧装订的方式钉订在纸的两边打印四版就是四本书打印周刊和小册子普通选骑马订方式,打印较厚的书也可以通过更改起始页码和最大页码实现分组骑马订的装订方式如果没有切纸打印一半刀想少量打印较厚的书可选四页一组方式,但要一页一页的折只“只打印一半”的选项惟独选外侧装订方式时才会浮现,因为外侧装订方式打印出的文件有对称性,也就是说正看反看都一样,这样只打印一半,但份数加倍,打印的两份相对一合就是完整的一份这对打印较厚的书很实用,计算出的页码能减少一半能少分几组正面倒序、背面倒序这些要根据打印机的情况来定,普通情况下,喷墨打印机正面和背面都选正序,而大部份激光打印机正面选正序,背面选倒序那种带抽屉式的激光打印机如佳能
3200、联想的机器,普通正面和背面都是倒序双面打印制作PDF格式的文件时需要选中此项,这时它计算出的页码是正反面在一起的,一个正面,一个背面,一个正面,一个背面现在还有自动翻面的双面打印也需要用到此选项打印机名称打印前看一看打印机名称,是不是想用的那台,如果发现不对,按框上的向下箭头,选择打印机逐份打印机器不带纸,或者有专人看着,选此方式,这种方式一份一份的打,过后不用人工去挑选,缺点是人得看着,一旦机器带纸,就会造成反正面对不上,纸和粉就浪费了把逐份打印前面的对号打掉,就是“逐页打印”,也就是说第一页打几百份全打印完成后再去打印下一页这样打印时比较省心,不怕机器带纸,只是过后得花时间挑页版面右移(版面下移)打印两版时将为“版面右移”,打印四版时将为“版面下移”先打印一页,两页对折看一下摆布边差多少,然后就在框中输入多少,左移或者上移时输负数由于WORD本身并没有设此功能,此功能只是通过调整纸张高度来实现的,可能在有些打印机上或者个别小册子上不好用如果不想用此功能一定别忘了把它变成,程序中还有一个“记住版面挪移值”的选择,如果不用此功能可把上面的对号去掉最大页码程序将会把文档的总页数自动添迤去,如果不对可手动去改,但不要大于总页数,否则会打印混乱计算和打印以上选择完成后,按“计算”按钮,程序在最大的文本框中显示计算出的页码,然后用鼠标选中要打印的页码,再按“打印”按钮,即可完成打印这里注意一点,不要选文字,选中的页码尾部不应是”号,前面不应是空行打印版数在打印机属性中设置在有些打印机如爱普生和三星的机器,打印多版时一页lo o份它按lo O页来计算,浪费时间,选中此项然后在打印机属性中选4版可解决此问题有时反正面对不上,也可用此方法试试“高级”按钮按“高级”按钮,程序的窗口就会变长,多出一些平时不长用的选项同时该按钮上的文字变成“常规”,再按一下此钮程序窗口将复原单独打印第几张当逐页打印时,正面可以一下把所有的页都发给打印机,可背面,只能一页一发了用此功能可免去选页码的麻烦,打印一张后,数字会自动加1使用时,先点左侧的小方格,然后输入要打印第几张,注意,这里的张数不是页码,一整篇算一张,如16页小册子,最后一张是第4张多节打印此项主要是为了打印有重复页码的复杂文档,程序自动打开高级方式中的多节打印功能,并自动添加节数和每节的页数分组“骑马订”打印有的同修习惯于使用“线装订方式”做大法书籍,所以需要对厚书做分组的“骑马订”打印为此更新后的“多版打印
6.20增加了分组骑马订打印”的功能,具体方法如下:点击最上面的“多版打印”图标,再点击“高级”按钮,就可以看到“起始页码”的选项,可以通过修改“起始页码”和“最大页码”来实现分组“骑马订”打印用40页一组打印《转法轮》举例(也可以用32页、或者36页等等作为一组,“起始页码”和“最大页码”要做相应的调整,每组页码应该为4的倍数)打开《转法轮》word文件,点击最上面的“多版打印”图标,程序会自动打开“高级”选项,打印方式选“骑马订”,每页版数选“2”则为2合1排版,每页版数选“4”则为4合1排版起始页码选“1”(把光标点在这里,直接用键盘输入“1”,也可以按旁边的滚动键来修改),最大页码选“40”(把光标点在这里,直接用键盘输入“40”,也可以按旁边的滚动键来修改),计算并打印,这是第一组;然后,起始页码选“41”,最大页码选“80”,计算并打E|J,这是第二组;起始页码选“81”,最大页码选“120”,计算并打印,这是第三组;起始页码选这是这是最大页码选最60”,计算并打印,最第四组;起始页码选“161”,大页码选200,大计算并打印,最这是第五组;起始页码选“201”,页码选“240”,大计算并打印,最起始页码选“241”,页码选“280”,大计算并打印,最这是第六组;起始页码选“281”,页码选“320”,计算并打印,最这是第七组;起始页码选大页码选“344”(《转法轮》word最这是第八组;“321”,文件共344页,所以最大页码”为344,而不是360),计算并打印,这是第九组至此全部打印完毕其它不同页码的分组方式与此类似有两个注意事项
1、“起始页码”为奇数(
1、
41、
81、
121、
161、
201、
241、
281、321,等等),“最大页码”为偶数(
40、等、
120、
160、
200、
240、
280、
320、344,等等)o
2、如果按顺序打印的话,从第二组开始,每一组的“起始页码”为上一组的“最大页码”加1;每一组的“最大页码”为上一组的“最大页码”加40(如果40页为一组的话)还有,最后一组的“最大页码”为该word文件的总页数。