arcgis拓扑规则中文解释1

1.Must NotOverlap Area面不能重叠

2.Must NotHave GapsArea面不能有空隙

3.Must CoverEach OtherArea-Area面必须互相覆盖

4.Must Be Covered ByFeature ClassOf Area-Area面必须被其他要素的要素类覆盖

5.Must Be Covered By Area-Area面必须被其他要素覆盖

6.Must NotOverlap WithArea-Area面不能与其他要素重叠

7.Boundary Must Be Covered By Boundary Of Area-Area面边界必须被其他要素的边界覆盖

8.Boundary Must Be Covered ByArea-Line面边界必须被其他要素覆盖

9.Contains Point Area-Point面包含点

10.Contains OnePointArea-Point面包含一个点线-----------------------------

11.Must NotSelf-Overlap Line不能自重叠

12.Must NotSelf-Intersect Line不能自相交

13.Must NotIntersect OrTouch InteriorLine不能相交或内部接触

14.Must NotOverlap Line线要素不能重叠线要素不能相交

16.Must NotHave DanglesLine不能有悬挂点

17.Must NotHave Pseudo-Nodes Line不能有伪节点

18.Must NotOverlap With Line-Line不能与其他要素重叠

19.Must BeCovered ByFeature ClassOf Line-Line线必须被其他要素的要素类覆盖

20.Must NotIntersect WithLine-Line不能与其他要素相交

21.Must NotIntersect orTouch InteriorWithLine-Line不能与其他要素相交或内部接触

22.Must BeCovered ByBoundary OfLine-Area线要素必须被其他要素边界覆盖

23.Must BeInside Line-Area线必须位于面内部

24.Endpoint Must BeCovered By Line-Point端点必须被其要素覆盖点-----------------

25.Must BeDisjoint Point必须不相交

26.Must CoincideWith Point-Point点必须与其他点要素重合

27.Must BeProperly InsidePoint-Area点必须完全位于内部

28.MustBeCoveredByBoundaryOfPoint-Area

29.MustBeCoveredByPoint-Line点必须被线覆盖

30.MustBeCoveredByEndpoint OfPoint-Line点必须被其他要素的端点覆盖

31.Endpoint MustBeCoveredBy Line-Point端点必须被其他要素覆盖、。